電蒸汽鍋爐發作器裝備上無挪動部件，操作起來安全和牢靠。 那么它的操作規程是怎樣的呢？
 
1、打開電蒸汽鍋爐http://www.hbyuandong.com.cn/自來水閥門，打開總電源，并且打開電蒸汽鍋爐發生器電源。 
Open electric steam boiler water valve, open the main power and turn on the power generator, electric steam boilers.

2、對電蒸汽鍋爐排污時選擇在當天設備用完之后，關閉蒸汽發生器電源，這時，蒸汽發生器的壓力會慢慢下降，當下降到0.2.Mpa時，打開蒸汽發生器后方的排污閥門，利用該壓力將蒸汽發生器內的污垢沖出。打開閥門后，等十秒鐘即可關掉。排污時間過長，會使蒸汽發生器中的水全部排掉，導致電熱管太暴露，影響電熱管的使用壽命。
Select the day after the device runs out, turn off the steam generator power, this time, the pressure of the steam generator will slowly decline, down to the moment when 0.2.Mpa, open the steam generator blowdown valve at the rear of the electric steam boiler blowdown, With this pressure the dirt out of the steam generator. After opening the valve, and more than 10 seconds off. Discharge time is too long, the steam generator will drain all the water, resulting in too exposed heating pipes, affecting the life of electric heating.
 
3、電蒸汽鍋爐http://www.hbyuandong.com.cn/排污過后在一個小時內絕對不可打開電源，每天使用完畢必須關閉設備電源、總電源、自來水。
Electric steam boilers within one hour after the sewage must not turn on the power, a day after use must turn off the power, total power, water.